| AustinHealeywood.com Austin Healey wood seat restoration parts |
 |  |  |
| Austin Healey 3000 BJ8 Folding wood rear seat back restoration kits and individual parts |
| All of the Austin Healey seat back frames and individual pieces are made of solid hardwood. The rear panel is made of 1/8 inch baltic birch plywood. These parts will work with your original seat back components. |
| Part # AH-SBKIT1 Assembled rear seat back with metal corner brackets and stainless steel trim screws. Reuse your original folding panels. You drill and place the chrome hinges using your originals. Instructions included. $265 |
Part # AH-SBKIT2
Rear seat back wood parts without upper rail.
These are the parts which most commonly rot
away. You reuse your original upper rail and
folding panels. You drill and place the chrome
hinges using your originals.
Instructions included.
$179
Rear seat back wood parts without upper rail.
These are the parts which most commonly rot
away. You reuse your original upper rail and
folding panels. You drill and place the chrome
hinges using your originals.
Instructions included.
$179
Part # AH-UPRAIL
Upper rail
$75
Upper rail
$75
Part # AH-SIDE
side supports right and left with
hardware.
$85/pr
side supports right and left with
hardware.
$85/pr
Part # AH-LOWRAIL
lower rail with 8-32 T nuts.
You drill and place the chrome hinges
using your originals.
$75
lower rail with 8-32 T nuts.
You drill and place the chrome hinges
using your originals.
$75
Part # AH-SBPANEL
rear panel 1/8 inch fiber board
$25
rear panel 1/8 inch fiber board
$25